Axis Q1931–E User Manual

Also see for Q1931-E: Installation guide Installation guide User manual

AXIS Q1931–E Thermal Network CameraAccessing the ProductClick the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computerkeyboard to cancel full screen view.The Record button is used to record the current video stream. The location where the recording is saved can be specified inthe AMC Control Panel. Enable this button from Live View Config > Viewer Settings.AMC Audio ControlsAMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible whenaudio is enabled.Speaker button — Click to turn the speakers on or off.Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode, the Microphone and Talkbuttons must both be active to send audio to the Axis product. Click either button to stop audio transmission.Use the slider to control the volume of the speakers and the microphone.Half-duplex modeThe Talk/Listen button is used to switch between sending and receiving audio. The button can be configuredfrom the Audio tab in the AMC Control panel:• Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.• Toggle mode: Click once to switch between talking and listening.Simplex – speaker only modeTo send audio, the Talk and Microphone buttons must both be active. Click either button to stop audiotransmission.10