Axis Q3505-SVE Mk II Installation Manual

Also see for Q3505-SVE Mk II: Installation guide

Contents

AXIS Q3505-SVE Mk II Network Camera1 Network connector2 Control button3 I/O connector4 Audio in connector5 Audio out connector6 SD card slot7 Status LED8 Function button9 Not usedLED IndicatorsNote• The Status LED can be configured to flash while an event is active.• The Status LED can be configured to flash for identifying the unit. Go to Setup > SystemOptions > Maintenance .Status LED IndicationUnlit Connection and normal operation.Green Shows steady green for 10 seconds for normal operation afterstartup completed.Amber Steady during startup. Flashes during firmware upgrade or resetto factory default.Amber/Red Flashes amber/red if network connection is unavailable or lost.Status LED behavior and buzzer signal for leveling assistantFor information on the function button used for leveling the image, see page 12.11