Axis Q3505–VE Installation Manual

Also see for Q3505-V: User manual Installation guide

Contents

AXIS Q3505–VE Fixed Dome Network CameraNoteThe installation and management software tools are available on the CD supplied with theproduct and from the support pages on www.axis.com/techsupTo reset the product to the factory default settings:1. Disconnect power from the product.2. Press and hold the control button and reconnect power. See Hardware Overview onpage 10.3. Keep the control button pressed for about 15–30 seconds until the status LED indicatorflashes amber.4. Release the control button. The process is complete when the status LED indicator turnsgreen. The product has been reset to the factory default settings. If no DHCP server isavailable on the network, the default IP address is 192.168.0.905. Using the installation and management software tools, assign an IP address, set thepassword, and access the video stream.It is also possible to reset parameters to factory default via the web interface. Go to Setup> System Options > Maintenance.Further InformationThe User Manual is available at www.axis.comVisit www.axis.com/techsup to check if there is updated firmware available for your networkproduct. To see the currently installed firmware version, go to Setup > About.Visit Axis learning center www.axis.com/academy for useful trainings, webinars, tutorials andguides.Warranty InformationFor information about Axis’ product warranty and thereto related information, seewww.axis.com/warranty/21ENGLISH

/ 22

Related manuals for Axis Q3505-V