AXIS Q7404 Video EncoderSpecificationsTo find the latest version of the product’s datasheet, go to axis.com > [product] > Support &Documentation.LED indicatorsLED Color IndicationGreen Steady for connection to a 1000 MBit/s network. Flashes for networkactivity.Amber Steady for connection to a 10/100 MBit/s network. Flashes for networkactivity.Net-workUnlit No network connection.Green Steady green for normal operation.Amber Steady during startup, during reset to factory default or when restoringsettings.StatusRed Slow flash for failed upgrade.Green Normal operation.PowerAmber Flashes green/amber during firmware upgrade.NoteThis AXIS product has four Status LED indicators, one for each video channel. The indicatorsare ordered as follows (from left to right): Power, Status 1, Status 2, Status 3, Status 4,Network.ConnectorsNetwork connectorRJ45 Ethernet connector.Audio connectorThe Axis product has the following audio connectors:• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channelis used from a stereo signal).• Audio out – 3.5 mm output for audio (line level) that can be connected to a publicaddress (PA) system or an active speaker with a built-in amplifier. A pair of headphonescan also be attached. A stereo connector must be used for audio out.13EN