AXIS Q7411 Video EncoderSafety instructionsWARNINGThe Axis product shall be installed by a trained professional, and in compliance with locallaws and regulations.NONONOTICETICETICE• The Axis product shall be used in compliance with local laws and regulations.• Store the Axis product in a dry and ventilated environment.• Avoid exposing the Axis product to shocks or heavy pressure.• Use only applicable tools when installing the Axis product. Using excessive force withpower tools could cause damage to the product.• Use only accessories that comply with the technical specification of your product. Thesecan be provided by Axis or a third party. Axis recommends using Axis power sourceequipment compatible with your product.• Use only spare parts provided by or recommended by Axis.• Do not attempt to repair the product yourself. Contact Axis support or your Axis resellerfor service matters.TransportationNONONOTICETICETICE• When transporting the Axis product, use the original packaging or equivalent to preventdamage to the product.BatteryThe Axis product uses a 3.0 V BR2032 lithium battery as the power supply for its internal real-timeclock (RTC). Under normal conditions this battery will last for a minimum of five years.Low battery power affects the operation of the RTC, causing it to reset at every power-up. Whenthe battery needs replacing, a log message will appear in the product’s server report. For moreinformation about the server report, see the product´s setup pages or contact Axis support.The battery should not be replaced unless required, but if the battery does need replacing, contactAxis support at axis.com/support for assistance.Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether(EGDME), CAS no. 110-71-4.WARNING• Risk of explosion if the battery is incorrectly replaced.• Replace only with an identical battery or a battery which is recommended by Axis.20