Axis Q7411 User Manual
Also see for Q7411: User manualInstallation guideInstallation guide
                                                           | |
Contents
| 
AXIS Q7411 Video EncoderSystem Options• Pan Tilt Zoom is used to control a PTZ device. The PTZ device requires a driver. See Installing a PTZ driver for moreinformation. Drivers can be downloaded from www.axis.com• Generic TCP/IPallows the Axis product to receive data and send commands via TCP/IP. Daisy chain server - Allows Daisychain clients to communicate with the Axis product.Select the desired Port Type from the drop-down list. For more information on Serial Port Settings and Daisy Chain Port Settingssee the online help .Port StatusThe list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.MaintenanceThe Axis product provides several maintenance functions. These are available under System Options > Maintenance.Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the currentsettings.Click Restore to reset most settings to the factory default values. The following settings are not affected:• the boot protocol (DHCP or static)• the static IP address• the default router• the subnet mask• the system time• the IEEE 802.1X settingsClick Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. TheAxis product can also be reset to factory default using the control button, see Reset to Factory Default Settings, on page 48.To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours.This can be useful for identifying the product among other products installed in the same location.For information about firmware upgrade, see Upgrading the Firmware, on page 49.SupportSupport OverviewThe System Options > Support > Support Overview page provides information on troubleshooting and contact information,should you require technical assistance.See also Troubleshooting, on page 49.System OverviewTo get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview. Information thatcan be found here includes firmware version, IP address, network and security settings, event settings, image settings and recent logitems. Many of the captions are links to the proper Setup page.46 |
Related manuals for Axis Q7411
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine