Axis Q7414 User Manual

Also see for Q7414: User manual User manual Installation guide Installation guide

Axis Q7414 User Manual Manual pdf 23 page image

23AXIS Q7414 - PTZNotes:• After a PTZ driver has been installed, PTZ > Advanced > Device will contain additional driver specific settings thatcan be configured for the PTZ device.• Advanced users and application developers can also use the Axis Application Programming Interface and HTTPspecification for generic control of PTZ devices using CGI commands or a TCP/IP client. Refer to the Axis websiteat www.axis.com for further information.If AXIS Q7414 is mounted into an AXIS Q7900, one PTZ device can be connected to each of the four video channels.If AXIS Q7414 is mounted into an AXIS 291, video input 1 on AXIS Q7414 supports several Pan Tilt Zoom (PTZ) devices. PTZdevices can also be used on video inputs 2-4, by creating an internal connection to them from video input 1. For furtherinformation see Using PTZ on video inputs 2-4 (AXIS 291 1U Video Server Rack), on page 26.Uninstalling a PTZ driver1. Go to PTZ > Driver Selection2. Click UninstallFor more information see the online help .Preset positionsA preset position is a pre-defined camera view than can be used to quickly steer the camera view to a specific location.From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera view to the required position. Whensatisfied with the position, enter a descriptive name. The position, iris and focus settings are then saved as a preset position.The preset position can be assumed at any time, by selecting the preset's name from the Preset positions drop-down list.Preset positions can be selected in the Live View page; they can be selected as an action when an event is triggered as a partof a Guard Tour.One position can be set as the Home position, which is readily accessible by clicking the box beside Use current position asHome. The position's name will then have (H) added to the end, for example, Office Entrance (H).Guard tourA guard tour moves between chosen Preset Positions, one-by-one, in a pre-determined order or at random, and forconfigurable time periods. The guard tour sequence will keep running, after the user has logged off or closed the browser.AdvancedDevice Settings - The device settings window is for driver specific settings, so the appearance of this window can varydepending on the driver installed. Options that can be configured include: Driver Specific Settings for Video Source 1,Mechanical Limits for Moving Video Source 1, Light Control for Video Source 1, and Extended Driver Specific Settings forVideo Source 1.Control Settings - Here are the tools for creating and saving short command buttons that are located under the Controlpanel. These buttons provide direct access to various built-in auxiliary commands provided by the PTZ driver and are displayedin the PTZ Panel.OSD Menu - If the PTZ driver supports an internal configuration menu, this can be accessed using the On-Screen Display(OSD). Configure the analog camera by opening and navigating through its internal menu in this display.Other options appearing under the Advanced menu are dependant on the driver installed. See online help for information.