Axis Q7424–R Mk II User Manual
Also see for Q7424-R Mk II: Installation guide
                                                                  | |
Contents
| 
AXIS Q7424–R Mk II Video EncoderHardware Overview• Connecting to an AXIS Video Hosting System service. See page 48. To connect, press and hold the button for about 3seconds until the Status LED flashes green.• Connecting to AXIS Internet Dynamic DNS Service. See page48. To connect, press and hold the button for about 3 seconds.LED IndicatorsNote• The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports& Devices > LED. See the online help for more information.• The Status LED can be configured to flash while an event is active.• The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .Status LED IndicationGreen Steady green for normal operation.Amber Steady during startup and when restoring settings.Red Flashes red for firmware upgrade failure.NoteThe Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > SystemOptions > Ports & Devices > LED. See the online help for more information.Network LED IndicationGreen Steady for connection to a 1 Gbit/s network. Flashes for network activity.Amber Steady for connection to a 10/100 Mbit/s network. Flashes for network activity.Unlit No network connection.NoteThe Power LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports &Devices > LED. See the online help for more information.Power LED IndicationGreen Normal operation.Amber Flashes green/amber during firmware upgrade.9 |
Related manuals for Axis Q7424-R Mk II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine