Axis Q8685-E Installation Manual

Also see for Q8685-LE: User manual User manual Installation guide

Contents

AXIS Q8685-E PTZ Network CameraReset to factory default settingsCAUTIONRisk of injury. Moving parts. Keep your body parts away from the product when inoperation. Disconnect from power supply before installing or performing maintenanceon the product.CAUTIONRisk of injury. Hot surface. Do not touch the product when in operation. Disconnectfrom power supply and allow the surfaces to cool before performing maintenance onthe product.ImportantReset to factory default should be used with caution. A reset to factory default will resetall settings, including the IP address, to the factory default values.NoteThe installation and management software tools are available from the support pages onwww.axis.com/support/downloadsTo reset the product to the factory default settings:1. Disconnect power from the product.2. Remove the four top cover screws and remove the top cover.3. Change the position of the Factory default switch, see Hardware overview on page 10.4. Replace the top cover and tighten the screws (torque 3.0 Nm).5. Re-connect power to the product.It is also possible to reset parameters to factory default via the web interface. Go to Setup >System Options > Maintenance and click Default.24