Axis T91A61 Installation Manual

Contents

Page 8 AXIS T91A Series Installation Guide5. Use the Torx screws to secure the parapet bracket to the bracket holder.6. Rotate the bracket and tighten the secure nut to lock the bracket in a sideways position. Thecamera can now be installed safely rather than hanging over the edge of the roof. The securenut is loose at delivery for this purpose.7. Refer to the Installation Guide for the network camera for instructions on how to attach thecamera to the bracket.8. Rotate the bracket into position and tighten the secure nut firmly.Notes:• Some installations may require the supplied pendant adapter to be replaced, which is done byloosening the stop screw and unscrewing the adapter. In this case, refer to the Installation Guideincluded with the pendant kit.Secure nutSafety wireTorx T30 screws (3)Slots for unit holders (3)Torx T30 screws (4)Rotate sideways toinstall camerawww.a1securitycameras.com email: sales@a1securitycameras.com