Aztech DSL1000EWL User Manual

Also see for DSL1000EW L: Start guide User manual

Aztech DSL1000EWL User Manual Manual pdf 18 page image

User ManualPage 18 of 73Setup the DeviceWhen installing the router, find an area where there are enough electrical outlets for the router, themain computer, and your other computer devices.To setup the router:1. Plug one end of the Ethernet cable from the router’s ETHERNET port and then plug the otherend into the Ethernet port in your computer.2. If you have another device you need to connect through wire into the router, use another pieceof Ethernet cable. Plug one end of the Ethernet cable from the computer’s Ethernet port andthen plug the other end into an available Ethernet port in the router.3. Plug one end of the telephone cable from the POTS Splitter’s ADSL port and then plug theother end into the router’s DSL port.POTS SplitterYour phone line carries with it both phone calls and Internet signals. When you are using theInternet, the connection produces high-pitched tones that can affect your voice calls when using thephone. Installing a Plain Old Telephone Service (POTS) splitter separates the two signals andeliminates the noise.To setup a telephone on the POTS Splitter:a. Locate the phone jack in your house.b. Insert the POTS Splitter into the phone jack.c. Plug one end of the telephone cable from the POTS Splitter’s TEL port and then plug the otherend into the telephone.4. Connect the power adapter from the router’s 12V 1A DC port into the electrical outlet.5. Press ON.