Aztech DSL600E(C) Quick Installation Manual

Also see for DSL600E: User guide Easy start

Contents

hardware setup

Aztech DSL600E(C) Quick Installation Manual Manual pdf 1 page image

ETHERNET PORTETHERNETCABLECOMPUTERADSL MODEMConnect one end of the Ethernet cable to the Ethernet port of t he computer and theother end to the ETHERNET Port of the DSL Modem.1cNote:The picture illustrates the connection t o a single telephone or fax machine. If you have another telephoneor fax machine connected to other telephone wall socket (sharing the same line), please attach anotherPOTS Splitter to telephone wall socket to prevent DSL signal from getting disconnected while surfing.TELEPHONETELEPHONELINE(OPTIONAL)WALL SOCKETCONNECT TO WALL SOCKETDSL MODEMPOTSSPLITTERDSL JACKConnect one end of the telephone line to the modem labeled ADSL and the other end to thepots splitter labeled MODEM (optional) to connect a physical telephone, use another telephoneline connect from the telephone to the pots splitter labeled PHONE.1bDSL MODEMPOWER SWITCHDC 9V JACKPower AdapterPower CableStep1 : Hardware SetupConnect the power adapter to the power socket and the other end to the DC 9V jack of the DSLRouter. Switch on both POWER adapter and the DSL MODEM.1aQUICK INSTALLATION GUIDEVersion 1.0Aztech DSL600E(C)Ethernet ModemPackage Contents1. 1 x DSL600E(C) Ethernet Modem2. Quick Installation Guide3. User Manual (Found in CD)4. Utility CD5. 1 x RJ-45 Straight Cable6. 1 x Telephone Cable ( RJ-11)7. 1x Power Adaptor (9V)8. 2 x POTS SplitterMinimum System Requirements- Windows 98SE/ ME/ 2000/ XP- MAC 9.x to 10.x- 64 MB RAM for Win 98 SE/ ME- 128 MB RAM for Win XP/ 2000- 64 MB or 128 MB RAM for Mac- 4 x CDROM Drive- Ethernet Port (LAN Card)For Technical SupportPlease contactAztech Systems Ltdsupport@aztech.comTel: 6749-2062Support Hotline HoursMon-Fri, 9am to 6pm(Except public holidays)ImportantBefore you run the utility CD, please make sure that PC’s Network Card TCP/IPProperties and the Internet browser proxy is set accordingly. It is also assumed that thecomputer/ notebook has the network card already installed.(Note: Settings for TCP/IP may be optional as the DSL Modem has a built-in function that allows theuser who has a Static IP Address on the network card to access either the DSL Modem configurationpage or surf web)FOR WINDOWS USERS:2. Settings for Internet Browser Proxy:i) Windows Desktop-> right click on Internet Explorer (IE) icon, scrolldown to select Propertiesii) “Internet Properties” window -> click Connections tab -> SelectNever dial a connection -> click LAN Settings …iii) “Local Area Network (LAN) Settings “window ->remove the tick forthe option for the Automatic configuration -> remove the tick for theoption box for Proxy Server -> click OK -> click again to exit from“Internet Properties” window3. For Singnet Filtering Service User (e.g. Family On-line)i) Windows Desktop -> right click Internet Explorer (IE) -> clickPropertiesii) “Internet Properties” window -> click Connections tab Select Neverdial a connection -> click LAN Settings kkdkiii) Click to put a tick for Automatically detect settingsiv) Click to put a tick for “Use a proxy server for your LAN ...”-Type filter.singnet.com.sg in “Address” field ->Type 8080 in “Port” -> click Advanced-Proxy Settings window - > click to put a tick for “Use theSame Proxy Server for all protocols”-Type 192.168.1.1 in the space provided under“Exceptions”. Click OK to exit “Proxy Setting” -> click OKto exit “LAN Settings” -> click OK again to exit “Internet Properties”1a. Configure TCP/IP settings for Win 98SE/Mei) Windows Desktop -> right click Network Neighborhoodfor Win98SE / Network Places for Win ME -> Propertiesii) “Network” window -> click the Configuration tab -> scroll down toselect and double click TCP/IP xxx (xxx refers refers to the modelof the Ethernet Network Card connected to the DSL600E(C))iii) “TCP/IP Properties” window -> select IP Address tab ->SelectObtain an IP address automatically -> click DNS Configurationtab -> click Disable DNS -> Click OK1b. Configure TCP/IP settings for Windows 2K/XPi) Windows Desktop-> right click on Network Place icon, scroll downto select Propertiesii) “Network & Dial-Up Connection” window -> click LocalArea Connection -> scroll down to select and double clickInternet Protocol TCP/IPiii) “Internet Protocol (TCP/IP) Properties” ->select Obtain anIP address automatically -> select Obtain DNS serveraddress automatically -> click OKFOR WINDOWS 98SE/ME/XP/2000 USERS2aIMPORTANT: Insert the Utility CD into the CD-ROM. The utilitywill auto-run and display the main menu. Select Setup Wizardbutton to proceed.(Note: If doesn’t auto-run, then go to the CD-ROMdrive and execute the Setup.exe)FIREWALL REMINDERS:If your computer is installed with a firewall, it might prompt thatthe setup launcher is trying to access the internet, just click onAllow or Grant Access to proceed with setup. If the firewalldoes not give you the prompt and utility informed you that yourcomputer is with a firewall, exit the utility and try disabling thefirewall rerun the utility CD. Enable the firewall after completingthe setup.Setup Wizard will start to check and configurethe PC and DSL Router. In event the Wizardprompts error, please follow the guide to rectifythe problem.2bAfter checking, it will prompt you to enterUsername and Password to setup the InternetConnection.2cStep2 : Configuring Using Setup Utility Step3 : Connect to the InternetEnter your Username and Password given by theISP. Depending on the service where yousubscribed, you need to include the suffix“@singnet” or “@singnet1500” or“@singnetbusiness” after the username. ClickCONTINUE to proceed.3aUpon successful connection to the Internet, it willdisplay a summary of the settings, you may saveor print for future reference. Click CONTINUE toproceed3bIt will show info that the internet connection wassuccessfully established. You may click on thecube to start surfing or click EXIT to exit the utility3C

/ 2

Related manuals for Aztech DSL600E