Aztech WL556E User Manual
Also see for WL556E: Easy start guideUser manualStart guideSpeci?cationsEasy start guide
                                  | |
Contents
| 
User ManualPage 13 of 34Setup Your Device as a Wireless APUse the WL556E as a Wireless Access Point to turn a regular modem-routerinto a wireless capable networking device. Simply connect an Ethernet cablefrom any available Ethernet LAN port on the modem-router to the Ethernetport of the WL556E. The WL556E will serve as a wireless interface for yourwireless-enabled devices such as laptops and smartphones to connect to theInternet via your existing modem-router.To setup the device as a wireless AP:1. Connect an Ethernet cable from an available port in your modem-router and connect the other end of the Ethernet cable to the Ethernetport of the WL556E.For a new Out-of-The-Box unit, No extra configuration is needed for theWL556E to be used as a wireless AP. Simply connect an Ethernet cablefrom your existing modem-router to the WL556E and you are ready tosurf the Internet wirelessly. If you have already made any configurationon the WL556E, press the Reset button beside the Ethernet port for 5seconds to restore the device to its factory default configuration. |
Related manuals for Aztech WL556E
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine