THE BEAUTY OF POWERB-52 ACTPRO Active Systems - Instruction ManualACTPRO18CONNECTIONSEXAMPLE #5This example shows the set-up of a pair of ACTPRO12M loudspeakers to be used as stage monitors. Theaudio signal is provided by a mixer, a ProdigyFX in this example. Some mixers have a mono monitoroutput but in this case you can daisy-chain a few ACTPRO12M speakers by connecting the INPUT of oneto the OUTPUT of another with an XLR cable.Note: It is recommended to turn the LOW-CUT switch ON for better clarity in guitar and voice rangesand avoid LF build-up on the stage.Note: You can add the ACTPRO12M as a monitor to any of the previous examples (1 through 4) or toany other set-up.