B52 Aries Plus 2.0 Instruction Manual
              | |
www.b52audio.com 6VALET MODE (remote selectable)CODE LEARNING1) In disarmed, open the door, turn ACC to ON position, press + for 2 sec,siren chirps once to indicate to enter valet mode, LED on.2) When in valet mode, only press or to lock and unlock.3) If you are going to have your vehicle serviced, turn ignition to ON, pressing +simultaneously for 2 sec at the same time. Siren chirps once and LED on mean byenter into this mode.4) TO EXIT: To repeat step 1, siren chirps twice to exit this mode, LED off.1) In disarmed, open the doors, turn ACC from OFF to ON., keep pressing the reset switch 3sec, siren chirps once, and LED keeps lighting to indicate that the system has entered intothe learning code mode.2) Press any button of remote controller within 10 sec. Siren chirps once to show that thefirst remote controller is learned successfully.3) Repeat step 2 to program the second, third and fourth transmitter code (sirenchirps twice to indicate the second transmitter code was learned, siren chirps 3times to indicate the third transmitter code was learned, siren chirps 4 times toindicate the fourth transmitter code was learned). When the fourth one was learned,siren chirps twice to indicate to exit program.4) After learning the remote controller you need, turn ACC from ON to OFF or do notpress the remote within 10 sec, the system will exit the learning mode automatically,meanwhile siren will chirps twice to indicate.NOTICE: (the system can only learn four remotes), when learn the fifth remote; the firstone will be erased.Main UnitOutput Current: 10A × 1Coding: Learning CodeVoltage: 12VDC± 3VStatic Current: <8mAIndicator Current: 2 mAShock Sensor Current: <5mAFrequency: 315MHzRemote(Aries Plus / A52):Voltage: 12 VStatic Current: <7mA±2mABattery: 27AFrequency: 315 MHz |
Related manuals for B52 Aries Plus 2.0
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine