B17AHook-n-Loop Pad Attachment(145-V or 150V series pads)• With the top slide secured to the climber, insert the shank into thetunnel of the pad until the top slide loop is seated in the tunnel slotor steel insert. Squeezing the tunnel will allow the climber to slide ineasier. (A)• (B, C) Feed the climber pad retaining strap through the top slideloop and/or the steel insert and pull tight to secure the shank to thepad. To assist in sliding the strap through the loop, place a piece ofpaper or other thin material over the end of the strap while slidingthrough the top slide loop. A pair of pliers can be used to pull thestrap.C
