163.2 Factory Default SettingsBefore configuring your, you need to know the following default settings.Web Interface:Username: adminPassword: adminLAN Device IP Settings:IP Address: 192.168.1.254Subnet Mask: 255.255.255.0ISP setting in WAN site:PPPoEDHCP server:DHCP server is enabled.Start IP Address: 192.168.1.100IP pool counts: 1003.2.1 Username and PasswordThe default username and password are “admin” and “admin” respectively.AttentionIf you ever forget the password to log in, you may press the RESETbutton up to 6 seconds to restore the factory default settings.Attention