BEC MX-1000 User Manual

Also see for MX-1000: Quick install guide

Contents

BEC MX-1000 User Manual Manual pdf 83 page image

Device ConfigurationAccess Management – SNMP 79BEC MX-1000 User ManualSNMPSimple Network Management Protocol (SNMP) is a protocol used for exchanging managementinformation between network devices. SNMP is a member of the TCP/IP protocol suite. The MX-1000serves as a SNMP agent that allows a manager station to manage and monitor the router through thenetwork.SNMP: Select to enable SNMP feature.Get Community: Type the Get Community, which is the password for the incoming Get-and-GetNextrequests from the management station.Set Community: Type the Set Community, which is the password for incoming Set requests from themanagement station.Trap Manager IP: Enter the IP of the server receiving the trap message (when some exception occurs)sent by this SNMP agent.SNMPv3: Enable to activate the SNMPv3.User Name: Enter the name allowed to access the SNMP agent.Access Permissions: Set the access permissions for the user; RO--read only and RW--read andwriter.Authentication Protocol: Select the authentication protocol, MD5 and SHA. SNMP agent cancommunicate with the manager station through authentication and encryption to secure the messageexchange. Set the authentication and encryption information here and below.Authentication Key: Set the authentication key, 8-31 characters.Privacy Protocol: Select the privacy mode, DES and AES.Privacy Key: Set the privacy key, 8-31 characters.Click Save to apply the settings.