BEHA ORC 1527 Instruction Manual
                           | |
Contents | 
OperationNormal Mode : under this mode, the heater works at the setting level, afterreaching the setting temperature, it stops heating and the setting temperature flashes.Fast-heating mode under this mode, the heater works normally, the level andsetting temperature are not adjustable, the heater works at default settingtemperature(35 )and the indicator light circle indicates red.Energy Saving Mode : under this mode, the heater works normally, the level andsetting temperature are not adjustable, the heater works at default setting temperature(22 ). (In Energy Saving 0RGH, if the setting temperature flashes, it means theheater is under energy saving heat preservation work state).The indicator light circleindicates green.Anti-Freezing Mode : under this mode, press the knob to adjust the level, but thesetting temperature is not adjustable, the heater works at default anti-freezingtemperature(5 ). (In Anti-Freezing 0RGH, if the setting temperature flashes, it meansthe heater is under anti-freezing heat preservation work state). The indicator lightcircle indicates orange.[Introduction on Mode][Memory Function]Cleaning and care0DNH sure that the heater is unplugged from the mains socket and has cooled toroom temperature before cleaning.Clean the heater with a damp cloth and thoroughly dry off before use again.SPECIFICATIONSRatings:220-240V~50Hz1500WCorrect Disposal of this productThis marking indicates that this product should not be disposed with otherhousehold wastes throughout the EU. To prevent possible harm to theenvironment or human health from uncontrolled waste disposal, recycle itresponsibly to promote the sustainable reuse of material resources. Toreturn your used device, please use the return and collection systems orcontact the retailer where the product was purchased. They can take thisproduct for environmental safe recycling.We apologise for any inconvenience caused by minor inconsistencies in theseinstructions, which may occur as a result of product improvement and development.When the power of the heater is not cut off or the heater keeps under Standby 0RGH,it can memorize the last working mode and setting temperature and works at thesetting temperature after turning on, the memory data will be reset if the power supplyof the heater is cut off, and the setting temperature of the heater recovers to thedefault setting (Normal 0RGH, high, setting temperature is 35 ) when turning on.26 |
Related manuals for BEHA ORC 1527
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine