Babboe BIG-E User Manual

Contents

Babboe BIG-E User Manual Manual pdf 15 page image

28 29DISPLAY & CONTROLSInsert the battery into your Babboe cargo bike to make use of the pedal assistance.Plus and minus buttonSwitch on the electrical system by pressing the ‘plus’ button. To turn off the system, holdthe ‘plus’ button down for longer. By pressing the‘plus’ button briefly, the system increases the levelof pedal assistance. By pressing the ‘minus’ buttonbriefly, the system decreases the level of pedalassistance. The motor provides support from the firstall the way to the highest level.Lighting indicatorThe lighting indicator displays the status of the rearlight. By briefly pressing the button, the rear light will switch on or off. The front of the bikeis equipped with battery lights and these can be operated on the light itself (and not viathe display).Walk-assist (walking distance)The Babboe cargo bike has a walk-assist function, which means that the assistancecan also be enabled while walking next to the cargo bike. Walk-assist is switched on bypressing the ‘minus’ button and holding it down while walking. Walk-assist has a speedof about 5 km/h. The function should only be used when the Babboe cargo bike is pushedalong when walking.Battery indicator (on display)There are four red LEDs on the display. Each light on the battery indicator is equal toapproximately 25% of the total battery capacity. With four burning lights, the battery isapproximately 75-100% full. When there is no light on the battery indicator the motor willgradually cease assistance.Important! Please note:• You can see the battery status on the battery. It is possible that the status of thebattery is slightly different to the battery status on the display. The battery status onthe battery is most accurate. Once you start using your Babboe cargo bike, the statuson the display should match the status of the battery.Pedal assistance indicatorThe indicator shows which pedal assistance level the Babboe cargo bike is on. This has 6different levels and a 0 level. You can see which level the pedal assistance is on by lookingat the red LED light. In level 0, the system does not provide any assistance, but the lightingand walk-assist function are still available. You can adjust the level of the pedal assistancewith the ‘plus’ and ‘minus’ buttons.Important! Please note:• In level 0 and when walk-assist is activated, there is no LED light visible.29EN