Baby Jogger City Go Instructions Manual

Also see for city GO: Instruction manual Manual Manual Instructions

Contents

Baby Jogger City Go Instructions Manual Manual pdf 28 page image

28Before installing base, make sure vehicle ison level ground.Place base on an approved vehicle seatlocation.1 Open the lock off.2 Route the vehicle seat belt through therear-facing belt path (marked with labels)and buckle. The seat belt should lay flatand not twisted.3 Check the level indicator on the base.The bubble must be completely withinthe zone of your childs weight. For infantsweighing 1.8-9 kg (4-20 lb) the bubblemust rest within the light blue line. Forchildren weighing 9-16 kg (20-35 lb) thebubble must rest within the dark blueline. Adjust the recline foot if needed.BASE INSTALLATION - LAP BELT ONLY123 1.8-9 kg (4-20 lb)9-16 kg (20-35 lb)