94APPENDIX ——————————————————————————————————————————————Stitch SettingsApplications, stitch lengths and widths and whether the twin needle can be used are listed for utility stitches inthe following table.Utility stitchesStitch Name PatternPresser FootApplicationStitch Width[mm (inch)]Stitch Length[mm (inch)]Twin NeedleReverse/ReinforcementStitchingWalking FootSide cutterAuto Manual Auto ManualStraightstitchLeft 00 J Basic stitching, sewinggathers or pintucks, etc.0.0(0)0.0–7.0(0–1/4)2.5(3/32)0.2–5.0(1/64–3/16)Yes(J) Reverse No YesCenter 01 J/IAttaching zippers, basicstitching, sewinggathers or pintucks, etc.3.5(1/8) 0.0–7.0(0–1/4) 2.5(3/32) 0.2–5.0(1/64–3/16) Yes(J) Reverse No NoTriple stretchstitch02 JAttaching sleeves,sewing inseams, sewingstretch fabrics anddecorative stitching0.0(0) 0.0–7.0(0–1/4) 2.5(3/32) 1.5–4.0(1/16–3/16) Yes(J) Reinforcement No NoStretch stitch03J Sewing stretch fabricsand decorative stitching1.0(1/16)1.0–3.0(1/16–1/8)2.5(3/32)1.0–4.0(1/16–3/16)Yes(J) Reinforcement No NoZigzag stitch04J Overcasting andattaching appliqués3.5(1/8) 0.0–7.0(0–1/4) 1.4(1/16) 0.0–4.0(0–3/16) Yes(J) Reverse No No3-point zigzagstitch05JOvercasting on mediumweight or stretch fabrics,attaching elastic,darning, etc.5.0(3/16) 1.5–7.0(1/16–1/4) 1.0(1/16) 0.2–4.0(1/64–3/16) Yes(J) Reinforcement No NoOvercastingstitch06G Overcasting on thin ormedium weight fabrics3.5(1/8) 2.5–5.0(3/32–3/16) 2.0(1/16) 1.0–4.0(1/16–3/16) No Reinforcement No Yes07G Overcasting on thickfabrics5.0(3/16) 2.5–5.0(3/32–3/16) 2.5(3/32) 1.0–4.0(1/16–3/16) No Reinforcement No Yes08GPreventing fraying inthick fabrics and fabricsthat fray easily5.0(3/16)3.5–5.0(1/8–3/16)2.5(3/32)1.0–4.0(1/16–3/16) No Reinforcement No Yes09J Overcasting on stretchfabrics5.0(3/16)0.0–7.0(0–1/4)2.5(3/32)0.5–4.0(1/32–3/16)Yes(J) Reinforcement No NoBlind hem stitch10R Blind hem stitching onmedium weight fabrics00(0) -3 – 3- 2.0(1/16)1.0–3.5(1/16–1/8) No Reinforcement No No11R Blind hem stitching onstretch fabrics00(0) -3 – 3- 2.0(1/16) 1.0–3.5(1/16–1/8) No Reinforcement No NoAppliqué stitch12J Appliqué stitching 3.5(1/8) 2.5–7.0(3/32–1/4) 2.5(3/32) 1.6–4.0(1/16–3/16) Yes(J) Reinforcement No NoShell tuck edge13J Shell tuck stitching 4.0(3/16) 0.0–7.0(0–1/4) 2.5(3/32) 0.2–4.0(1/64–3/16) Yes(J) Reinforcement No No