Bacharach 19-8104 Operation & Maintenance Manual

Contents

Bacharach 19-8104 Operation & Maintenance Manual Manual pdf 7 page image

Instruction 19-9326 3Monoxor III2.0 TECHNICAL CHARACTERISTICSCO Dsplay Range ...................... 0–2000 ppmAccuracy ..................................... ±5% of readng or ±10 ppm,whchever s greater*Resoluton ................................... 1 ppmResponse Tme ........................... 90% of final value within 40 sec.Battery Requrement ................. Four dsposable ‘AA’ Alkalne batteresOperatng Tme .......................... Up to 18 hours contnuous (pump runnngand backlght off)Warm Up Tme ........................... 10 or 60 seconds (dependng on COchannel zero setup, refer to Page 9)Dsplay ........................................ 4 digit by 2 line, 7-segment Liquid CrystalDsplayFront Panel Controls .................. Sx push button swtches(refer to Secton 3.3)Operatng Temperature:Analyzer ................................. 32–104 °F (0–40 °C)Probe ....................................... 1000 °F (538 °C) max. at 5" nsertonHumdty..................................... 15 to 90% RH (non-condensing)Prnter Port ................................ IrDA or HP protocolWeght ......................................... 16 oz wth batteresSze.............................................. 7.5"H x 3.1"W x 2.1"D (190x79x53 mm)* Tighter accuracy in the lower ranges, up to ±2 ppm, may be attained if alower range calibration gas (e.g. 100 ppm CO) is used.