Bacharach ADM800 Instruction
Also see for AGM300: Product catalogInstructions
                                                                                              | |
Contents
| 
Instruction 3015-4275 45Zone Hold ModeA zone can be placed on hold and continuously monitored for a length of time determined by the Zone HoldTime value (Page 38). To place a zone on hold, press and hold down the key adjacent to that zone until youhear a beep. The word "HOLDING" appears to identify which zone is being held.Zone Screen (Hold Mode)Once in the hold mode you can further investigate the status of the zone by pressing the adjacent key and goingto the Zone Setup #1 Screen (Page 41). To release the zone from the hold mode, press and hold down theadjacent key until the unit beeps and the screen display reverts to normal. You may also press and hold downthe key adjacent to any other zone to release the current zone and put the new zone on hold.Alarm ConditionsWhen an alarm condition is detected anywhere on the network the red ALARM LED will glow. Additionally, anexternal alarm device may activate and an audible alarm may sound if those features have been enabled(Pages 28 & 35).An inverse flashing box indicates an alarm condition in the affected zone.Zone Screen (Alarm Mode)Zone on HoldZone in Alarm |
manualsdatabase
Your AI-powered manual search engine