Bacharach Fyrite INSIGHT PLUS Instruction Manual

Also see for Fyrite INSIGHT PLUS: Instruction manual

Contents

Bacharach Fyrite INSIGHT PLUS Instruction Manual Manual pdf 67 page image

FyriteINSIGHTPlus Manual Operation0024-9487 Rev 1 614.4. The RUN ScreenThe Fyrite INSIGHT Plus test data is located in the Run screen. By pressingthe RUN/HOLD button, you should hear the pump running and see the wordRUN at the upper-left hand corner of the display. The instrument iscontinuously measuring and calculating the data that is shown in the Runscreen.Press the RUN/HOLD button again. The pump should stop running and theword HOLD should be shown at the upper-left hand corner of the display. Theinstrument now shows the last measured and calculated data taken before theinstrument was placed in HOLD.Use the UP () and DOWN () arrow buttons to scroll through the completelist of measured and calculated values when the instrument is running or in theHOLD mode.Combustion Test Parameters NA SiegertOxygen O₂ O₂Carbon Monoxide CO COExcess Air EA LambdaEfficiency Using Higher Heating Value Eff EffCarbon Dioxide CO₂ CO₂Setting for Maximum Carbon Dioxide in Flue Gas CO₂ MaxStack Temperature T-STK T-STKAmbient Air Temperature T-AIR T-AIRStack Loss qAEfficiency Using Lower Heating Value EtaCarbon Monoxide/Carbon Dioxide Ratio CO/CO₂CO content referenced to an Oxygen percentage n CO(n) CO(n)Average of 3 Manually Entered Smoke Numbers AVG SMOKEPresence of Oil Derivatives (Manually Entered) OIL DERIVEBoiler Temperature (Manually Entered) BOILER TEMP