Backyard GBC1460W Owner's Manual

Also see for BY13-101-001-10: Owner's manual

Contents

Backyard GBC1460W Owner's Manual Manual pdf 11 page image

Need help? 1.800.762.1142Do not return to place of purchase.RecipesBlueRhino.com/recipesReplacement Partsparts.BlueRhino.com /1.800.762.114211Installing LP Gas TankTo operate, you will need one precision-filled standard grill LP gastank with external valve threads.W CAUTION: LP gas tank must be properlydisconnected and removed prior to moving thisgrill.Insert and Secure LP Gas TankLoosen LP gas tank retainer bolt by turning counter-clockwise.Place precision-filled LP gas tank upright into hole in grill body so the tank valve is facing thegas line connection.Secure tank by turning LP gas tank retainer bolt clockwise until tight.Connecting LP Gas Tank1. Before connecting, be sure there is no debris caughtin the head of the LP gas tank, head of the regulatorvalve or in the head of the burner or burner ports.2. Connect regulator/hose assembly to tank by turningknob clockwise until it stops.Disconnecting LP Gas Tank1. Before disconnecting, make sure the LP gas tank valveis “CLOSED.”2. Disconnect regulator/hose assembly from LP gas tankby turning knob counterclockwise until it is loose.W CAUTION: LP gas tank must be properlydisconnected and removed prior tomoving this grill.3. Place the protective cap cover on the LP tank andstore the tank outdoors in a well ventilated area out ofdirect sunlight.Getting More PropaneNeed a tank of gas? One option is to try propane exchange. It’s easy, fast,safe, and available at tens of thousands of conveniently located retailoutlets nationwide, which are typically open nights and weekends. Youcan purchase a fresh, precision-filled tank or exchange your empty for afresh, precision-filled tank. Another option is to have your tank refilled at arefill station. Be sure to check the hours of operation for the refill station.20 lb9 Kg17.9 in. / 45.5 cm12.2 in. / 31 cmOperating InstructionsChecking for LeaksBurner Connections1. Make sure the regulator valve and hoseconnections are securely fastened to the burnerand the tank.2. Visually check the connection between theburner/venturi pipe and orifice.3. Make sure the burner/venturi pipe fits over theorifice.W WARNING: Failure to inspect thisconnection or follow these instructionscould cause a fire or an explosionwhich can cause death, serious bodilyinjury or damage to property.4. Please refer to diagram for proper installation(Figures 1 and 2).5. If the burner/venturi pipe does not rest flush to theorifice, as shown, please contact 1.800.762.1142for assistance.Tank/Gas Line Connection1. Make 2-3 oz. of leak detection solution by mixingone part liquid dishwashing soap with three partswater.2. Make sure control knobs are in the “ OFF”position (Figure 3).3. Connect LP gas tank per “Installing LP Gas Tank”section.4. Turn LP gas tank valve to “OPEN.”5. Spoon several drops of solution, or use a squirtbottle, at all “X” locations (Figures 1, 2 and 4).a. If any bubbles appear, turn LP gas tank valve to“CLOSED,” reconnect and re-test.b. If you continue to see bubbles after severalattempts, turn LP gas tank valve to “CLOSED”and disconnect LP gas tank, per “Disconnect LPGas Tank” section. Contact 1.800.762.1142 forassistance.c. If no bubbles appear after one minute, turnLP gas tank valve to “CLOSED,” wipe awaysolution and proceed.Operating Main BurnersFirst Use1. Make sure all labels, packaging and protectivefilms have been removed from the grill.2. Remove manufacturing oils before cooking on thisgrill for the first time by operating the grill for atleast 15 minutes on (HIGH) with the lid closed.This will “heat clean” the internal parts anddissipate odors.LightingW CAUTION: Keep outdoor gas cookingappliance area clear and free from combustible materials, gasolineand other flammable vapors and liquids.W CAUTION: Do NOT obstruct the flow of combustion and ventilation air.W CAUTION: Check and clean burner/venturi tubes for insects and insectnests. A clogged tube can lead to a fire.W CAUTION: Attempting to light the burner with the lid closed may causean explosion.1. Open lid.2. Check for obstructions of airflow to the burners. Spiders, insects and webs can clog theburner/venturi tube. A clogged burner tube can lead to a fire.3. All control knobs must be in the “ OFF” position (Figure 3).4. Connect LP gas tank per “Installing LP Gas Tank” section.5. Turn LP gas tank valve to “OPEN.”6. Push and turn any control knob to (HIGH). The burner should light. If it does not, repeatup to three times.7. If ignition does not occur in 5 seconds, turn burner control knob “ OFF,” wait 5 minutes,and repeat lighting procedure.Figure 1: Main BurnersXBurner/Venturi TubeLP GasValve withOrificeLP GasConnectionFigure 2: Side BurnerXXLP GasConnectionValve Soft PipeConnectionLP GasValve withOrificeBurner/VenturiTubeFigure 3OFFAPAGADOFigure 4XX XX X