Standalone Keypad DescriptionPage 5March 2016 FMS-UM-01811-EN-02STANDALONE KEYPAD DESCRIPTIONDisclaimerThe user/purchaser is expected to read and understand the information provided in this manual, follow any listed SafetyPrecautions and Instructions and keep this manual with the equipment for future referenceThe information in this manual has been carefully checked and is believed to be entirely reliable and consistent with theproduct described However, no responsibility is assumed for inaccuracies, nor does Badger Meter Inc assume any liabilityarising out of the application and use of the equipment describedProduct Identification InformationRecord the product identification numbers from the nameplate hereModel Number _______Serial Number _______Tag Number _______(if applicable)Keypad Installation• Mount the keypad upright with the antenna pointing upward, near a 120V AC electrical outlet• Mount the keypad to a structurally sound wall through the two holes on the top of the keypad case and one hole on thebottom of the keypad• Height on the wall should be 5 feet to 6 feet• Avoid direct, significant, heat sources• Do not mount the keypad behind any steel objects (tool storage cabinets or metal chain link fences) that may block the RFcommunication signalsMounting Dimensions for Keypad(Holes on Keypad are Threaded for M6 x 1 Screw)7-5/8”3-13/16”7-3/8”Figure 1: Keypad Installation