Baehr Tec S2000 Operating Manual
                                                    | |
Contents
| 
Operating Manual BaehrTec S2000Page 36/52 English– V101 – Status 07/2015The filling level contacts that protrude from the tank walls (48), must becleaned every four weeks. Please do not use cotton wool or wool cloths toclean them, but rather a cloth or the Baehr wipes (Art-No. 11000)5.3 Cleaning and disinfecting the fine filterThe BaehrTec S2000 is equipped with two fine filters (47). Please always ensure that youonly fill the tank with spray solution approved for the device (Baehr spray solution forBaehr spray technology devices, Art-No. 22333). Should you detect any contamination inthe tank, empty it completely immediately and rinse it with clear tap water. Use a microfibrecloth to clean the tank wall if they are dirty.Should the spray function malfunction at some point despite observing all of the cleaningmeasures described here, then check the fine filters to see whether they are clogged. Toclean the fine filter, please only do this if the spray function does not work perfectly,and please proceed as follows.1) Switch the device off and disconnect it from the power supply.2) Empty the tank completely.3) Remove and dirt from the tank.4) Rinse the tank with clear tap water.5) Empty the tank completely and dry it (microfibre cloth).6) Carefully unscrew the fine filter using a flat-head screwdriver and make sure that younever damage the filter mesh.Fig. 15 Fig. 16Fine |
Related manuals for Baehr Tec S2000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine