Bahco 7455 User Manual

Contents

Bahco 7455 User Manual Manual pdf 5 page image

5EN 10204The Torque Wrenches BAHCO 7455 / 7465 / 7456 are in accordancewith the requirements of:ISO 6789, EN 26789The test method and the equipment used for the calibration is inconformity with the afore mentioned norm. International traceabilitythrough calibration laboratories acc. to ISO 9000.CALIBRATIONContact your BAHCO sales representative for calibration services.Equipment Required: A torque source, accurate to 1 % of reading.Note: To insure specified accuracy:1. Apply load to the “V” notch on the handle.2. On flex-ratchet models, the head must be straight.3. Check calibration every 5000 cycles or annually.GUARANTEEThe warranty period is 24 months from the date of purchase or dateroopmorfstcefeddnaslairetam,strapytluafsrevocdnaeciovnifoworkmanship.If such a case should happen, please contact your local BAHCOfoesahcrupfoetadfofoorphtiwrehtegotecnatsissarofrentraPyour tool.CERTIFICATE OF COMPLIANCE GBMAINTENANCE/SERVICE1. The torque wrench’s internal mechanism is permanentlylubricated during assembly. Do not attempt to lubricatethe internal mechanism.2. Clean torque wrench by wiping. Do not immerse.3. Store torque wrench in protective case at its lowest torquesetting. Do not force handle below lowest setting.