Baker Hughes Masoneilan 12400 Series Instruction Manual & Safety Manual

Also see for Masoneilan 12400 Series: Instruction manual Instruction manual

Baker Hughes Masoneilan 12400 Series Instruction Manual & Safety Manual Manual pdf 23 page image

® 2017 Baker Hughes, a GE company. All rights reserved. Masoneilan 12400 Series Transmitter/Controller Instruction Manual | 216.1.4. PUSHBUTTONS MENUS DESCRIPTION AND HOW TO USE THEMSeven Appendixes (A, B, C, D, E, F and G) detail the communication paths inside each menu and give descriptions andexplanations of each function. NORMAL Menu (see Appendix A). SETUP Menu (see Appendix A). BASIC SETUP Menu (see Appendix B). ADVANCED SETUP Menu (see Appendix C). ENGINEERING UNIT Menu (see Appendix D). FILTERING Menu (see Appendix D). 4-20mA GENERATION Menu (see Appendix E). AUTOMATIC TUNING Menu (see Appendix E). VIEW DATA Menu (see Appendix F). FAILSAFE Menu (see Appendix G). VIEW ERROR Menu (see Appendix G).6.1.4.1. NORMAL Menu (Appendix A)To enter NORMAL Menu from normal operating mode, press any button.NORMAL menu allows to: Enter SETUP menu in order to set all instrument parameters. Access VIEW DATA menu (Appendix F) where the user can READ ONLY all current configuration, calibration and diagnosticsdata saved in the instrument. View all faults which have occurred since the last fault clear with VIEW ERROR menu (Appendix G). Clear all faults with CLEAR FAULT function (Appendix G). Come back to normal operating mode: display in sequence of level variable and output current.6.1.4.2. SETUP Menu (Appendix A)SETUP menu allows to: Enter BASIC SETUP menu (Appendix B) to set all basic configuration and calibration parameters for a quick commissioning. Enter ADVANCED SETUP menu (Appendix C) to set all advanced configuration and calibration parameters for completemanagement of process constraints and user practices. Come back to NORMAL menu. Access VIEW DATA menu (Appendix F) where the user can READ ONLY all current configuration, calibration and diagnosticsdata saved in the instrument. View all faults which have occurred since the last fault clear with VIEW ERROR menu (Appendix G). Clear all faults with CLEAR FAULT function (Appendix G).6.1.4.3. ENGINEERING UNIT Menu (Appendix D)This menu allows the user to: Define the desired engineering unit for the level variable (%, cm, cm3 …). Define the lower and higher level values (zero and span) expressed in engineering unit.6.1.4.4. FILTERING Menu (Appendix D)This menu allows the setting of the two filterings available in the instrument: Damping adjustment (analog filtering). Smart filtering parameters tuning.