Bakers Pride 100 Installation And Operating Instructions Manual

Also see for Vantage 100 Series: Installation and operating instructions Technical & service manual

Contents

Bakers Pride 100 Installation And Operating Instructions Manual Manual pdf 3 page image

For European Community Countries:Designated European Market = EN 437Gas Cat.Gases and SupplyPressures ATBEDKFIFRGRDEIEITLUNLPTESSEGBI2H G20 @ 20mbar I2L G25 @ 25mbar I2E G20 @ 20mbar I2E+ G20/25 @ 20/25mbar For North America:Type of Gas Manifold PressureNatural 3.5” Water ColumnLP 10” Water ColumnMODELS COVEREDMODEL BTU/hr kw100 Series 48,000 14.06200 Series 60,000 17.53300 Series 70,000 20.50400 Series 80,000 23.443151 Series 70,000 20.504151 Series 70,000 20.50D-125 *125,000 *36.61DS-805 70,000 20.50GS-805 60,000 17.58Y-600 120,000 35.15Y-800 120,000 35.15*Model D-125 is rated 105,000 BTS/hr (30.76 kw) for use with LP Gas. All other models have the samerating for Natural and LP Gas. LP Gas models are not available for European Community Countries.I. INSTALLATION INSTRUCTIONS1.RECEIVING:Read the notice on the outside carton regarding damage in transit. Damage discovered after openingthe crate(s)/carton(s) is ‘CONCEALED DAMAGE’ and the carrier must be notified immediately to sendan inspector and also to furnish forms for the consignee’s claim.When the oven arrives, it should consist of:a) A crate or carton containing your new oven.b) A carton containing 4 legs with mounting hardware.c) A strapped skid containing baking decks.Installation must conform with local codes and/or with the latest edition of the ANS Z-223.1National Fuel Gas Code in USA ( CAN/CGA-B 149.1 or 2 Installation Code in Canada).This appliance must be installed by a competent person in accordance with the rules in force. Inthe U.K. Corgi registered installers (including the regions of British Gas) undertake to work tosafe and satisfactory standards. This appliance must be installed in accordance with the currentGas Safety (Installation and Use) Regulations and the relevant Building Regulations / IEERegulations. Detailed recommendations are contained in the British Standard Codes Of PracticeBS 6172, BS 5440:Part 2 and BS 6891.Place the oven and parts as close as possible to the area of final installation before uncrating.3