Baldor Modbus Plus Installation And Operating Manual
                                  | |
Section 3InstallationInstallation 3-1Board InstallationThis section describes the Expansion Board installation procedure.Caution: Before you proceed, be sure to read and becomefamiliar with the safety precautions at the beginning of thismanual. Do not proceed if you are unsure of the safetyprecautions described. If you have any questions, contactBALDOR before you proceed.1. Remove the expansion board from the shipping container.2. Remove all packing material from the board.Caution: Be sure all packing materials are removed from theboard. Conductive foam may be present on the connectorsto prevent static build up during shipping. This can preventproper circuit operation.If you are installing only one board, refer to the “Single Expansion BoardInstallation” procedure. If you are installing two expansion boards (or asecond board) refer to the “Dual Expansion Board Installation”procedure. |
Related manuals for Baldor Modbus Plus
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine