Balluff BNI IOL-104-002-Z046 User Manual

Also see for BNI IOL-104-002-Z046: User guide

Balluff BNI IOL-104-002-Z046 User Manual Manual pdf 19 page image

www.balluff.com 198 IO-Link functions8.1. IO-LinkVersion 1.0 /1.1This device can be operated with an IO-Link master according to IO-Link version 1.0 andversion 1.1. Version-specific functions such as data storage (version 1.1) areonly supported in combination with a suitable IO-Link master.8.2. Data Storage Each IO-Link master of IO-Link version 1.1 features data storage in which an image of the IO-Link device configuration can be stored. When a device is replaced, the stored configuration isautomatically transferred to the new device. This guarantees minimal downtime. Validation mustbe switched on in order to use the data storage. For information about the configuration of datastorage and validation, please refer to the user's guide of the respective IO-Link master.8.3. BlockConfigurationThe device supports block configuration. This allows all parameters in a data block to beconsistently imported from a controller or a configuration tool into the device.8.4. Resetting toFactorySettingsThe factory settings on the device can be restored by running the "restore factory settings"system command.0x82 must be written to Index 2 Subindex 0 for the command.The extension port setting is not reset in this process.