BandLuxe E600 Series User Manual
                                                                         | |
Contents
| 
Installation7InstallationNotice before installationInstall the SIM card1. Unscrew the SIM card slot.2. Insert a valid SIM card into the SIM card slot. Push it until it clicks inplace.3. Screw the cap on tightly.Choose a solid and safe pole for CPE installation1. Choose the best location of the house and the orientation of the CPEto get the strongest signal reception from base station.2. The ambient temperature for E600 series must be within -40°C to65°C (-40°F to 149°F).NOTEFor lightning protection ground the CPE via Grounding Terminal and optimumreception, there are a few things you should consider before installation. Pleasesee “Important Installation Considerations” on page 8 for more details.Prepare two Ethernet cablesBe sure that one of the cables used is an outdoor grade CAT 5e (or above)Ethernet cable type and the length of the cables are adequate to reachthe location of the CPE and indoor PPoE are.Prepare wrenchesPrepare one wrench. The wrench size: 17mm x 1.Warning:Do NOT start any traffic test (ex: throughput test and Internet browsing)before the installer returns to the ground. |
Related manuals for BandLuxe E600 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine