MASTER LINKTECHNICAL DESCRIPTIONThe following section contains a brief description of the cabling mostoften used in connection with a BeoLink installation.Pictures (satellite, video tape recorder and ordinary TV broadcasts) aredistributed through a 75 ohm coaxial cable.Regarding part nos., see 'Accessories', page 39.29Å Master Link cablepin 1 = grey = power up/downpin 2 = shield = groundpin 3 = brown = signal, left channelpin 4 = yellow = loudspeaker relaypin 5 = green = signal, right channelpin 6 = white = Datalinkpin 7 = shield = groundpin 8 = pink = overloadÇ Power Link cable with wire for display data.Pin no. in the Master Cable colour FunctionLink socket1 white/green (WH/GN) data -2 green (GN) data +3 white/blue (WH/BL) ML-sense4-10 N.C.11 blue (BL) - supply voltage12 pink (PI) + supply voltage13 white/orange (WH/OR) - L14 orange (OR) + L15 white/red (WH/RD) - R16 red (RD) + RScreen 3 x solid wire Ground