                                                                    | |
Contents
| 
Expand your setupInformationYour TV supports a wide range of additional equipment. You can even connect aprojector or a home automation system to control room lights and curtains.Connect video recorders only to AV1 or AV2.Disconnect from the mainsWhile expanding your setup, the TV must bedisconnected from the mains.Disconnect TV from mainsSwitch off TVRemove the cable coverRemove the cable cover to get access to theconnection panel.Tilt main connection panel for-wardConnect additional equipmentTo operate non-Bang & Olufsen products withBeo5, attach a Bang & Olufsen IR-transmitter toeach product. See also pp. 48-49.Make the connectionsSelect corresponding socketmarked CTRLSwitch on the TVAlways attach covers before you connect theTV to the mains.Connect TV to mains supplyAttach all covers Switch on TVPress B to open the small door tosockets for temporaryconnectionsRelease the two locks A andpull off cover‘AUTO SELECTION’‘TIMER RECORDER’‘HDMI’Automatic selection of connected sources, when the TV is on and detects a signal.Activate the Timer recording option for a connected recorder. Available if you do not have the optionalBang & Olufsen hard disc recorder. Only available in the ‘AV1’ and ‘AV2’ menus, and can only beactivated in one of these menus at any time.Equipment connected via an HDMI IN socket. If you have set the ‘HDMI EXPANDER’ in the‘CONNECTIONS’ menu to ‘YES’, the ‘HDMI-C’ option in the ‘AV’ menus is replaced with ‘HDMI-C1’,‘HDMI-C2’, ‘HDMI-C3’, and ‘HDMI-C4’.BA46 |
Related manuals for Bang & Olufsen BeoVision 9
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine