19Change the country settingChanging the COUNTRY setting in theACCESS CONTROL menu can affect the ratinglevels used by Parental Control.1 1 1 1 no offAccess controlStatus windowLow power standbyChild lockParental levelChange countryChange codeTo activate Parental Control…> Press the blue button on Beo4 to bring up theon-screen tool bar.> Press ss or tt to move to OSD and ▼ to bringup the Personal Preferences menu.> Press ▼ to move down to and press tt tomove over to the Functions menu.ACCESS CONTROL is already highlighted.> Press tt to move to ENTER CODE.> Use the number keys on Beo4 to enter yourcode.> Press ▼ to move down to PARENTAL LEVEL andpress tt to be able the choose a suitability level.> Press ▲ or ▼ to choose a filter level between 1(for most suitable) and 8 (for least suitable).> Press GO to enter your choice and exit themenus or press ss to move back throughprevious menus.DVD scenes rated higher than your chosen levelwill not be shown. If alternative scenes at orbelow your chosen level are available on the disc,these will be shown instead. Set the filter level to0 to deactivate Parental Control.To change the country setting…> Press the blue button on Beo4 to bring up theon-screen tool bar.> Press ss or tt to move to OSD and ▼ to bringup the Personal Preferences menu.> Press ▼ to move down to and press tt tomove over to the Functions menu.ACCESS CONTROL is already highlighted.> Press tt to move to ENTER CODE.> Use the number keys on Beo4 to enter yourcode.> Press ▼ to move down to CHANGE COUNTRYand press tt to be able the choose a countrysetting.> Press ▲ or ▼ to choose a country from the list.> Press GO to enter your choice and exit themenus or press ss to move back throughprevious menus.. . . .