Bang & Olufsen Playmaker Manual

Also see for Playmaker: Manual Installation guide User manual

Contents

Bang & Olufsen Playmaker Manual Manual pdf 8 page image

EnglishThis guide contains informationabout the installation and dailyuse of your Bang & Olufsenproduct.The guide explains how to set itup for use with AirPlay®,DLNA®, line-in and connectedspeakers. You can set upPlaymaker in a wireless networkusing the BeoSetup App*1, yourcomputer, or you can connectPlaymaker to a wired networkfor immediate use. You can alsosee how to connect othersources to your Playmaker.It is possible to set up andsynchronise multiple Playmakersin your home. Contact yourBang & Olufsen retailer formore information.You can find more informationabout Playmaker in the FrequentlyAsked Questions (FAQ) section onwww.bang-olufsen.com/faq.Before you connect anyequipment to your Playmaker,make sure it is disconnectedfrom the mains supply.You must remove the back coverfrom Playmaker to access theconnection panel.> Place Playmaker on a soft clothwith the Bang & Olufsen logofacing downwards.> Remove the table stand(if already mounted).> Press firmly on the snap hookand lift off the back cover.> Run cables through the enclosedcable cover.*2> Run cables through the hole inthe back cover.> Connect Ethernet (optional),line-in (optional) and speakersbefore connecting the mainscord.> Reattach the back cover onPlaymaker. Make sure to alignthe pivot points at the edgesbefore closing the back cover.> Fit the table stand into the twoholes at the bottom of the backcover. Run the cables above thetable stand.How to get started8Press firmly on the snap hook toremove the back cover.Make sure to align the pivot pointsat the edges before closing theback cover.1*The BeoSetup App supports iOSand Android devices only. Scan theQR code on page 3 to downloadthe app.2*If you want a wireless networkconnection, do not run theEthernet cable through the cablecover. For more informationabout network connection,see ‘Network setup’.