Banner ABR 3000 series Quick Start Manual

Also see for ABR 3000 series: Instruction manual Quick start guide

Contents

Banner ABR 3000 series Quick Start Manual Manual pdf 1 page image

Quick Start GuideImager-based barcode reader with superior decoding capability in compact housingThis guide is designed to help you set up and install the ABR 3000. For complete information on programming, performance, troubleshooting,dimensions, and accessories, please refer to the Instruction Manual atwww.bannerengineering.com. Search for p/n 207637 to view the In-struction Manual and for p/n 207635 to view the Barcode Manager Software Instruction Manual. Use of this document assumes familiarity withpertinent industry standards and practices.WARNING: Not To Be Used for Personnel ProtectionNever use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. Thisdevice does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications.A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.ModelsTable 1: ABR 3000 ModelsModel Resolution Lens Lighting Options Communications CodesABR3009-WSU2WVGA(752 × 480 pixels) 9 mm, manual focusWhiteStandardSerial/USB 1D and 2DABR3009-WSE2 Serial/Ethernet 1D and 2DABR3009-WSU1 Serial/USB 1DABR3009-WSE1 Serial/Ethernet 1DABR3106-WSU21.2 MP(1280 × 960 pixels) 6 mm, manual focusSerial/USB 1D and 2DABR3106-WSE2 Serial/Ethernet 1D and 2DABR3106-WSU1 Serial/USB 1DABR3106-WSE1 Serial/Ethernet 1DABR3106-WPU2PolarizedSerial/USB 1D and 2DABR3106-WPE2 Serial/Ethernet 1D and 2DFeatures11143558 7 69102Figure 1. Models with Serial and Ethernet1. Smart Teach Interface2. Ethernet Connection LED3. Power LED4. Button5. Internal Illuminators6. Good Read LED (green)7. Lens8. Aiming System Laser Source9. Focus Adjustment Screw10. Ethernet Cable11. Power - Serial - I/O Cable31 4558 7 6 119Figure 2. Models with Serial and USBIndicators345 6 712Figure 3. Indicators—Top of DeviceIndicator Color LED Status During Normal Operation1 Power Blue Indicates connection to the power supply2 Ethernet Connection Amber Indicates connection to the Ethernet network3 READY/Learn Green Ready4 GOOD/Setup Green Reading successful5 TRIGGER/Focus (Aim) Amber Reading in progress. Do not trigger a new reading attempt until the cur-rent attempt finishes6 COM/Test Amber Active result output transmission on the Main serial or USB ports7 STATUS Red No read resultDuring the reader startup, all of the LEDs turn on for one second.SeeSmart Teach Interface on page 3 for the colors and meanings of the five LEDs when the reader is in Smart Teach mode.ABR 3000Original Document207636 Rev. A 2018-7-26