Banner ABR 7000 Series Quick Start Manual

Also see for ABR 7000 Series: Instruction manual Quick start guide

Contents

Banner ABR 7000 Series Quick Start Manual Manual pdf 1 page image

Quick Start GuideImager-based barcode reader with superior decoding capability and a powerful array of lens and lighting optionsThis guide is designed to help you set up and install the ABR 7000. For complete information on programming, performance, troubleshooting,dimensions, and accessories, please refer to the Instruction Manual atwww.bannerengineering.com. Search for p/n 207634 to view the In-struction Manual and for p/n 207635 to view the Barcode Manager Software Instruction Manual. Use of this document assumes familiarity withpertinent industry standards and practices.WARNING: Not To Be Used for Personnel ProtectionNever use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. Thisdevice does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications.A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.ModelsTable 1: ABR 7000 ModelsModel Resolution Lens Lighting Options Communications CodesABR7109-RSE21.3 MP(1280x1024 pixels)9 mm, manual focus RedStandard Serial/Ethernet 1D and 2DABR7109-MSE2 9 mm, manual focus Multicolored DPMABR7112-RSE2 12 mm, manual focus RedABR7116-RSE2 16 mm, manual focus RedABR7106-RSE2 6 mm, manual focus RedABR7106-MSE2 6 mm, manual focus Multicolored DPMABR71L9-RSE2 9 mm, autofocus RedABR71L9-MSE2 9 mm, autofocus Multicolored DPMFeatures1 2 345681091113127Figure 1. Models with Manual Adjustable Focus1. Smart Teach Interface2. Button3. Good Read LED (green)4. Internal Illuminator5. Aiming System Laser Pointers6. Lens7. No Read LED (red)8. Lens Cover9. Focus Adjustment Screw10. Power - Serial - I/O Connector11. Ethernet Connector12. Power ON LED13. Ethernet Connection LED1 2 3456810 1113127Figure 2. Models with Liquid Lens AutofocusIndicators345 6 71 2Figure 3. Indicators—Back and Top of DeviceIndicator Color Description1 Power Blue Indicates that the reader is connected to the power supply2 Ethernet Connection Amber Indicates connection to the Ethernet network3 STATUS Red No read result4 COM/Test Amber Active result output transmission on the Main serial port5 TRIGGER/Aim Amber Reading in progress. Do not trigger a new reading attemptuntil the current attempt finishes6 GOOD/Setup Green Reading successful7 READY/Learn Green ReadyDuring the reader startup, all of the LEDs turn on for one second.SeeSmart Teach Interface on page 3 for the colors and meanings of the five LEDs when the reader is in Smart Teach mode.ABR 7000Original Document207633 Rev. A 2018-7-26