Banner ES-TN-1H Series Manual

Banner ES-TN-1H Series Manual Manual pdf 1 page image

Printed in USA 12/04 P/N 61061 rev. AES-TN-1H.. E-Stop Safety Modules with Fixed Delay®Models with fixed delay, ranging from 0.25 second to 20 secondsFeatures• Selectable Auto-Reset or monitored Manual Reset.• Auto or manual power-up• One- or two-channel feedback monitoring• Monitors one dual-channel or one single-channel normally closed E-stopswitch circuit for a contact failure or wiring fault (Safety Category 2 or 4,per ISO13849-1 [EN954-1]; see pages 5 and 6).• 4 amp safety output contacts• Removable terminal blocks• Input monitoring circuit has diverse-redundant microprocessors• Designed for use in functional stop Category 0 and 1 applications(per ISO/EN 60204-1 and NFPA79)• Two immediate output switching channels (functional stop Category 0) andtwo delayed output switching channels (functional stop Category 1).• One auxiliary non-safety, normally closed immediate output and one auxiliarynon-safety normally closed delayed output for status monitoring.WARNING . . .This Emergency StopSafety Module is nota point-of-operationguarding device, as defined by OSHAregulations. It is necessary to installpoint-of-operation guarding devices,such as safety light screens and/orhard guards, to protect personnelfrom hazardous machinery. Failure toinstall point-of-operation guards onhazardous machinery can result in adangerous condition which could leadto serious injury or death.!ModelsModel DelayES-TN-1H1 0.25 secondES-TN-1H2 0.5 secondES-TN-1H3 1 secondES-TN-1H4 2 secondsES-TN-1H7 4 secondsES-TN-1H8 6 secondsES-TN-1H9 8 secondsES-TN-1H10 10 secondsES-TN-1H11 15 secondsES-TN-1H12 20 seconds