Demo KitEZ-SCREEN ® LP Safety Light ScreenKit Components Assembly(Using EZ-SCREEN Demo Kit)1. Obtain EZ-SCREEN power supply demo box found in theEZ-SCREEN Demo Kit p/n 71925.2. Attach trunk of the splitter ccordset to the demo box 8-pincable.3. Attach branches of the splitter cordset to the emitter andreceiver pigtail connections.4. Apply power to demo box and align emitter/receiver toilluminate the green indicator. This is assuming the emitterand receiver are configured for default settings:• Trip Output• No Blanking• Scan Code 1• E2 (2-Channel EDM)NOTE: Receiver can be configured for Latch output usingthe Reset button on the demo box. ReducedResolution and Fixed Blanking can also beconfigured, see manual for instructions. Receivermust be configured for 2-Ch EDM (E2) to work withdemo box.p/n 1435361.2.3.Model Description1. SLPE25-270P8 Emitter2. SLPR25-270P8 Receiver3. CSB-M1281M1281 Splitter Cordset— EZ-SCREEN LP Manual(p/n 140044)— Demo Bag— Setup Card (p/n 143536)