Banner Easy-LAM II Operating Instructions Manual
                        | |
Contents
| 
5INTRODUCTIONCongratulations on your purchase of the Easy-Lam II Roll Laminator. Thisunit is designed to provide years of trouble-free service.The Easy-Lam II will accept rolls of laminating film up to 27” wide in both1.5 and 3 mil thicknesses. Paper and card stock up to 1/16” (1.6mm) thickmay be laminated without adjusting the feed rollers.The Easy-Lam II will accept 5 mil film if the machine was purchased withthe 5 mil switch only!Your Easy-Lam II is preset at the factory for most applications, so anyadjustments should be minor. A thermometer provides continual indicationof the heat shoe temperature, which may be adjusted as needed.SPECIFICATIONSPlastic Width Up to 27” (68.6cm)Plastic Thickness 1.5 mil and 3 mil (37 and 75 micron).5 mil (125 micron) with 5 mil option switchonly.Maximum Roll Length 1.5 mil – 1,000 feet (304.8 meters)3 mil – 500 feet (152.4 meters)5 mil – 250 feet (76.2 meters)Speed 5 feet per minute (1.64m/minute)Net Weight 91 lbs (41 kg)Power Requirements 120VAC, 60Hz, 1840 watts (UL),220VAC available |
Related manuals for Banner Easy-LAM II
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine