Banner Q5X Quick Start Manual

Also see for Q5X: Instruction manual Reference guide Instruction manual Quick start guide Quick start guide

Contents

Banner Q5X Quick Start Manual Manual pdf 4 page image

Wiring Diagram413210-30V dcCH1CH2+–PUSH-PULLLoadLoadFigure 9. Channel 2 as PNP Discrete or PFM Output413210-30V dcCH1CH2+–PUSH-PULLLoadRemoteInputFigure 10. Channel 2 as Remote Input1432Key1 = Brown2 = White3 = Blue4 = BlackNote: Open lead wires must be connected to a terminal block.Note: The Channel 2 wire function and polarity is user-selectable. The default for the wire is PNP output. Referto the Instruction Manual (p/n 208794) for details regarding use as a remote input or pulse frequencymodulation (PFM) output.NPN Discrete Outputs413210-30V dcCH1CH2+–LoadLoadFigure 11. Channel 1 = NPN Output, Channel 2 = NPN OutputPNP Discrete Outputs413210-30V dcCH1CH2+–LoadLoadFigure 12. Channel 1 = PNP Output, Channel 2 = PNP OutputNPN Output and Remote Input413210-30V dcCH1CH2+–LoadRemoteInputFigure 13. Channel 1 = NPN Output, Channel 2 = NPN Remote InputPNP Output and Remote Input413210-30V dcCH1CH2+–LoadRemoteInputFigure 14. Channel 1 = PNP Output, Channel 2 = PNP Remote InputCleaning and MaintenanceHandle the sensor with care during installation and operation. Sensor windows soiled by fingerprints, dust, water, oil, etc. maycreate stray light that may degrade the peak performance of the sensor. Blow the window clear using filtered, compressed air, thenclean as necessary using only water and a lint-free cloth.Sensor ProgrammingProgram the sensor using the buttons on the sensor or the remote input (limited programming options).In addition to programming the sensor, use the remote input to disable the buttons for security, preventing unauthorized oraccidental programming changes. See the Instruction Manual, p/n 208794 for more information.Setup ModeAccess Setup mode and the sensor menu from Run mode by pressing and holding MODE for longer than 2 seconds. Use andto navigate through the menu. Press SELECT to select a menu option and access the submenus. Use and to navigatethrough the submenus. Press SELECT to select a submenu option and return to the top menu, or press and hold SELECT forlonger than 2 seconds to select a submenu option and return immediately to Run mode.Q5X Laser Triangulation Sensor with Background Suppression4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 208795 Rev. B