1 Product DescriptionRadar-Based Sensors for Detection of Moving and Stationary Targets• FMCW radar detects moving and stationary objects• Adjustable sensing field—ignores objects beyond setpoint• Easy setup and configuration of range, sensitivity, and output using the BannerRadar Configuration Software and Pro Converter Cable• Sensing functions are unaffected by wind, falling rain or snow, fog, humidity, airtemperatures, or light• Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication band• Rugged IP67 housing withstands harsh environmentsWARNING:• Do not use this device for personnel protection• Using this device for personnel protection could result in serious injury or death.• This device does not include the self-checking redundant circuitry necessary to allow its use inpersonnel safety applications. A device failure or malfunction can cause either an energized (on)or de-energized (off) output condition.1.1 ModelsModels MaximumRangeBeam Angle Telecom Approval1 Output Connection2Q130RA-9076-AFQ 24 m (78.7 ft) 90° × 76° Telecom approved for US, UK,Europe, China, Australia, andNew ZealandBipolar NPN/PNPN.O./N.C. ConfigurableIntegral 5-pinEuro-style (M12)quick-disconnect(QD)Q130RA-2450-AFQ 40 m (131.2 ft) 24° × 50°1.2 OverviewThe R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of thisemitted energy reflects back to the receiving antenna. Signal processing electronics in the sensor determine the distancefrom the sensor to the object based on the time delay of the return signal. The sensor can be configured (using a PC orremote input wire) to sense objects up to a specific distance, ignoring objects beyond this distance (also called backgroundsuppression).1 For additional countries, contact Banner Engineering.2 Models with a quick disconnect require a mating cordset. SeeQuick Disconnect (QD) Cordsets on page 23.R-GAGE® Q130RA Sensorwww.bannerengineering.com - Tel: + 1 888 373 6767 3