Banner RSD1QP Quick Start Manual
Also see for RSD1 Series: Instruction manual
    | |
SpecificationsSupply VoltageUse only with suitable Class 2 power supply12 V dc to 30 V dc:• Max. load of 330 Ω for analog current (4 mA to 20 mA)15 V dc to 30 V dc:• Max. load of 500 Ω for analog current (4 mA to 20 mA)Power and Current ConsumptionMaximum Power Consumption: < 3.6 W (At 30 V dc, 119 mA) with 2 discreteoutputs at 50 mA load eachPower Consumption, Normal Run Mode with No Load: < 0.6 W (At 30 V dc,19 mA)Supply Protection CircuitryProtected against reverse polarity and transient overvoltagesOutput ConfigurationAnalog output: 4 to 20 mA or 0 to 10 V, depending on sensorDiscrete output rating: Discrete NPN/PNP, depending on sensorNote: 2 ms output delay with white wireOutput RatingsDiscrete Output: 50 mA maximum (protected against continuous overloadand short circuit)OFF-state leakage current–PNP: < 10 μA at 30 VOFF-state leakage current–NPN: < 200 μA at 30 VOutput saturation voltage–PNP outputs: < 3 V at 50 mAOutput saturation voltage–NPN outputs: < 2 V at 50 mAAnalog current output: 330 kΩ max. at 24 V; max. load resistance =[(Vcc-4.5)/0.02 Ω]Analog voltage output: 2.5 kΩ min. load resistanceConnectionIntegral 150 mm (6 in) PVC cable with 5-pin M12/Euro-style quickdisconnectConstructionHousing: PolycarbonateEnvironmental RatingIEC IP65Operating Temperature–10 °C to +50 °C (+14 °F to +122 °F)Storage Temperature–40 °C to +70 °C (–40 °F to +158 °F)Vibration and Mechanical ShockAll models meet MIL-STD-202G, Method 201A requirements. Also meetsIEC 60947-5-2. Vibration: 10 Hz to 60 Hz maximum, 0.06 inch (1.52 mm)double amplitude, 10G maximum acceleration per IEC 60947-5-2. MIL-STD-202G, Method 213B, Condition I (100G 6x along X, Y and Z axes, 18shocks), with sensor operating. Also meets IEC 947-5-2 requirements: 30G11 ms duration, half sine wave.CertificationsBanner Engineering Corp. Limited WarrantyBanner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair orreplace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does notcover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TOBUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGESRESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previouslymanufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when theproduct is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp willvoid the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation atany time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:www.bannerengineering.com.RSD1 Remote Display© Banner Engineering Corp. All rights reserved |
Related manuals for Banner RSD1 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine