Printed in USA May 2018 P/N b_4441878 Rev. BHigh-Speed Part CountingSolutions GuideEquipmentGuide Features and BenefitsHIGH SPEED PART COUNTING Two asynchronous part counting inputs per Node (up to 16 Nodes) with up to 10 kHZ eventcounting.STATE INDICATION Monitor and log the current state of both part counting inputs to determine if the input is blockedor missing parts.PARTS RATE Calculate parts per minute for both part counting inputs based on user configurable reporting rate.RATE WARNINGS User configurable warnings for both part counting inputs based on the parts per minutes.SMS TEXT/EMAIL ALERTS Generate SMS text and/or email alerts based on specific eventsEFFICIENCY METRICS Produce efficiency metrics with provided dataCLOUD MONITORING Push data to Cloud Webserver or PLC (via LAN or Cellular connection) for remote viewing,alerting, and logging.Increase production efficiency by monitoring multiple part counts with to up 16 wireless Performance Nodes. The high-speed asynchronoustotalizing done by the DX80-P16E Node gives the ability to totalize up to 10,000 parts per second. Monitoring the current state of partcounting inputs along with parts per minute rates can be used to establish errors or inefficiencies in the system.Warnings are generated based on user input and the part rate to alert to conditions that are below standard operating conditions. Thesewarnings can be used to alert supervisors or production managers about an issue in the system via SMS text messaging, email alerts, or aremote master light.Model DescriptionDX80N9X1SX-P16E ORDX80N2X1SX-P16ESure Cross® Wireless Performance Node P16E; select either a 900 MHz or2.4 GHz ISM radio to match the DXM100Various Any sourcing (PNP) or sinking (NPN) input.DXM100-B1C1R1 orDXM100-B1C1R3DXM100 Wireless Controller with Cell; select either 900 MHz or 2.4 GHzISM radio to match the Q120s and K70s; the C1 model is only necessary ifcellular communiation is neededA PDF version of this Solutions Guide is available at https://goo.gl/SJ1zBN