Banner SureCross FlexPower BWA-SOLAR-001 Manual
        | |
Banner Engineering Corp. • Minneapolis, MN U.S.Awww.bannerengineering.com • Tel: 763.544.31642 P/N 137304 rev. FSureCross™ FlexPower™ Solar SupplyInstallation1 Brown Not connected2 White Not connected3 Blue dc common (GND)4 Black Not connected5 Gray 5V dc nominal5-pin M12 Euro Hookup12345Battery ReplacementSolar Core (Battery) ReplacementWhen the rechargeable batteries need to be replaced, order model number BWA-BATT-003. This replacement part includes the batteries, controller, and wiring.To replace the battery pack:1. Remove the sign-post top cap.2. Gently remove the battery and controller assembly by pulling the strap.3. Unplug the core pack from the sign post top cap.4. Plug the new core pack in and insert the core pack into the tube.5. Mount the cap securely and tighten.6. Charge the replacement solar core pack for 8 to 16 hours using the ac wallcharger (sold separately as an accessory). Though this solar core pack shipsfrom the factory with a partial charge, this recharge will ensure your batterypack has enough power to operate efficiently regardless of weather conditionsand sun availability.Figure 2Use the strap topull the batterypack out of thetube. Do not pull onthe wires.Connector from batterypack to sign post topcapProperly dispose of your used battery according to local regulations by takingit to a hazardous waste collection site, an e-waste disposal center, or any otherfacility qualified to accept NiMH batteries.As with all batteries, these are a fire, explosion, and severe burn hazard. Do notburn or expose them to high temperatures. Do not crush, disassemble, or exposethe contents to water.OverviewThe FlexPower Solar Supply provides autonomous power for continuous wireless sensing and monitoring applications in a compact,plug-and-play power solution. The FlexPower Solar Supply includes the panel, charge controller, rechargeable battery pack, and mountinghardware. The ac wall charger is sold separately.With a rechargeable battery pack, this assembly provides reliable power (nominal 5.0V dc) for applications with higher power demandsthan a standard DX81 (single battery) or DX81P6 (6-pack battery) can supply. The battery pack recharges in direct sunlight and suppliespower to the SureCross devices autonomously without sunlight. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine