transmissions, the number of non-courtesy transmissions, thenumber of emergency calls, the time of each transmission, andthe transmission interval) of the current channel, and the contactof the reply channel of the emergency alarm system is group call.Emergency AlarmInitiate an Emergency AlarmPress and hold the “Side button 1 (Call)” to enter the alarmmode; the red LED flashes, local and wireless alarm commandsare sent. LCD interface displays : The first line showsEmergency Alarm, the second line shows the alarm group callcontact alias, and the third line shows the group call number.Exit Emergency AlarmAlarm initiator can exit the alarm mode in the following ways:Press the [Call] button again.Press the [PTT] button.Turn off the unit.After the number of alarm cycles has been used, the radio willautomatically exit the emergency alarm mode.Receive Emergency AlarmThe alarm information is displayed after receiving the alarmcommand, and LCD interface displays : The first line showsReceive Alarm, the second line shows Group Call, the third lineshows the alarm alias or ID and sends local alarm; press the[PTT] button to exit.Note: The alarm system works only when the dealer hasconfigured the “emergency alarm system” of the current channel,and the contact of the reply channel of the emergency alarmsystem is group call.Alarm Call (Emergency Alarm and Call)Initiate an Alarm Call1.Press and hold the “Side button 1 (Call)” to enter the alarmmode; the red LED flashes, local and wireless alarm commandsare sent. LCD interface displays : The first line showsEmergency Alarm, the second line shows the alarm group callcontact alias, and the third line shows the group call number.2. Press and hold the [PTT] button to turn on the red LED, andspeak to the microphone to send an emergency call.Note: If you need to start an emergency call again when thenumber of emergency calls is used up, press and hold the [PTT]button.Exit Alarm CallAlarm initiator can exit the alarm mode in the following ways:Press the [Call] button again.Turn off the unit.After the number of alarm cycles has been used, the radio willautomatically exit the emergency alarm mode.Receive Alarm Call紧急报警Contact 11紧急报警组呼Contact 1