Baracoda BBR-LA Programming Manual

Baracoda BBR-LA Programming Manual Manual pdf 8 page image

RoadRunners BRR-L & BRR-LA Programming guide Nov 2007© Baracoda 2007 8/292.5/ Operating ModeReal Time mode (standard mode): barcodes are transmitted in real time to the remote host device/terminal (withoptional acknowledgment beep from the host to the scanner).User can choose if the scanner, when not connected, should read, memorize and later automatically upload thebarcodes or shouldn’t read the barcodes (no beam).Batch mode: Barcodes are stored in the scanner even if the reader is connected to a device. In order to uploadthe data the user will have to read the “discharge” barcode2.5.1/ Real time modeImportant reminder: if an ACK beep or bufferisation is needed, the scanner must be set in the “no data loss mode”first. (See part 1.2.2.)REAL TIME mode:Erases all codes in memory andforces the RoadRunners in Real time mode.No other setting is changed.REAL TIME with ACK beep and bufferisation.Forces the RoadRunners in Real Time mode (withdata acknowledgement). Erases all codes inmemory. The BRR should have been previously setin the “No data loss mode” ON.REAL TIME without ACK beep and buffersiation.Forces the RoadRunners in Real Time mode(without data acknowledgement). Erases all codesin memory. The BRR should have been previouslyset in the “No data loss mode” ON.